close
Celli Spa

Z90 Spading machine

HP 45-90   KW 33-66
Vangatrice con bielle smontabili Z90

Technical specifications and standard equipment

  • Maximum Horsepower: 90 HP (66 KW)
  • PTO: 540 rpm with 4-speed gearbox No. of teeth: 18-21 = 136; 19-20 = 151 rpm; No. of teeth: 20-19 = 167 rpm; 21-18 = 185 rpm
  • Oil bath lubrication and waterproof seal system
  • 1st category 3-point hitch (mod. 150,165,180,200 only)
  • 2nd category 3-point hitch (mod. 220.250 only)
  • Rear tailgate with leveling flap
  • Working depth adjustment by skids
  • Spades 225×175 mm (mod. 150,180,200,220,250 only)
  • Spades 225×205 mm (mod. 165 only)
  • Drive shaft with clutch safety device
  • Safety devices

Optional accessories

  • 4-speed gearbox for 540 rpm with rear PTO (mod. 220,250 only)
  • 3-point reinforced hitch (for mod. 220.250 only)
  • Pair of front depth control wheels Ø 300 mm (except for mod.150)
  • Pair of front depth control wheels Ø 300 mm (except for mod.150) (supplied separately at a later time)
  • Pair of oversized front wheels Ø 500 mm with reinforced hitch (for mod. 220,250 only)
  • Rear rake (replacing tailgate)
  • Resting feet kit
  • Low PTO (for mod. 220,250 only)

The Z90 can be used for tractors with up to a 90 HP maximum power range. Spading machines are known for solving deep soil processing problems in conditions that would be prohibitive for other tools. These machines eliminate bottom soil hardpan (deep layer of compacted soil), thus improving the deep circulation of water and aeration of the soil. Since these machines do not require any traction efforts, they can be used without issue in wet ground conditions and on sloping ground. They also reduce erosion by keeping the size of the clods at a medium level. The Z90 is a highly reliable machine, tested in the most difficult conditions by experienced and demanding users. A complete oil bath is used for crank gear lubrication, guaranteeing long life of the bearings and avoiding tedious daily greasing operations. The sides of the machines and safety devices have been completely redesigned to improve the flow of soil during operation and limit the risk of clogging. The maximum working depth is about 35 cm.  

Ideal for:

Working with medium sized tractors  ·  Cultivating heavy and sticky soil  ·  Working soil in depth  ·  Tillling soil in orchards and vineyards  ·  Breaking up the hardest soil  ·  Eliminating soil compacting  ·  Burying abundant crop residue  ·  Carrying equipment on the roads without risks  ·  

* Machines supplied as standard with low PTO gearbox (suitable for tractors with height up to 65 cm)
** Machines supplied as standard with high PTO gearbox (suitable for tractors with height from 65 to 85 cm)

Previous
« Y70
Next
G190 »

Information request

Enter your data to receive information on this product

 
 
Cancel

Tecnici (necessari)

Chiudi

Cancel

Marketing (Youtube)

Chiudi

Cancel

Marketing (Google Maps)

Chiudi